Silicone adult product molds
Discuss a silicone dispensing machine for sex toys using the actual product drawing, silicone grade and mold filling volume. Mold design and the curing process must suit the material.
Machine and application poster. Click to view the full-size image.
Two-tank A/B silicone equipment
Two-Component Silicone Dispensing Machine
Meter, mix and dispense two-component liquid silicone into product molds. This two-tank configuration is intended for silicone adult products, doll components and custom molded parts.
- Separate material tanks for components A and B
- Arm-mounted dispensing head for mold access
- Touchscreen control panel shown on the machine
- Configuration reviewed against your silicone and mold
Silicone Mixing and Dispensing Machine
An A/B silicone dispensing machine connects material preparation with mold filling. The two components remain separate before metering and mixing, so the selected silicone can be delivered to the mold in the required proportions.
For a meter-mix-dispense system, material compatibility matters as much as tank capacity. Share the silicone datasheet, ratio basis, viscosity and working time so the proposed material path and mixing arrangement can be reviewed. Tank count alone does not specify dispensing accuracy or output.
The pictured configuration combines two material tanks, a control cabinet and an overhead dispensing arm. Positioning the mold beneath the head can be planned around the mold opening, filling route and operator access.
A two-part silicone dispensing machine is also described as a 2K silicone dispensing machine: both refer to a two-component material system. For this A/B silicone metering system, the material datasheet determines the required mixing ratio and process settings.
Two-Tank Silicone Machine Configuration
| Material system | Two-component A/B liquid silicone |
|---|---|
| Tank arrangement | Two separate material tanks |
| Dispensing layout | Arm-mounted head as shown in the supplied image |
| Operator interface | Touchscreen panel and cabinet controls |
| Process role | Metering, mixing and filling compatible product molds |
| Ratio and viscosity range | Confirm against the selected silicone grade |
| Tank capacity and output | Specify in the quotation after application review |
| Power supply and accessories | Confirm for the destination workshop and process |
Ask for the confirmed specification sheet for your quotation. Tank volume, ratio range, dispensing performance and optional vacuum or cleaning equipment depend on the agreed configuration.
Silicone Dispensing Machine for Sex Toys and Custom Parts
Doll components and soft parts
For silicone doll parts, review the largest fill, material working time and mold handling space. The machine supplies material; finishing and assembly remain separate production steps.
Custom silicone mold filling
Use sample molds to review the filling route, air-release arrangement and required surface quality. Request a trial with representative material before confirming the final setup.
From Liquid Silicone to a Molded Part
1Prepare A and B
Confirm material identity, temperature and the supplier’s processing instructions.
2Confirm the dispense setting
Check the required ratio and shot amount using an agreed trial procedure.
3Fill the mold
Coordinate the dispensing head, fill path and venting with the actual mold.
4Cure and inspect
Use the approved curing method, then inspect the molded sample before production.
Questions Before Ordering
Is this a complete LSR injection molding machine?
This page describes an A/B metering, mixing and dispensing unit. A complete LSR injection molding system also requires suitable injection, clamping, tooling and curing equipment. Send your molding process so the full line scope can be confirmed.
Can this liquid silicone dispensing machine process my material?
Provide the material datasheet and specify ratio by weight or volume, viscosity, fillers and working time. Compatibility and dispensing settings should be confirmed for that formulation; a universal ratio or accuracy is not implied.
Are vacuum degassing and automatic cleaning included?
These items must be listed in the quotation if required. Review whether degassing is integrated or separate and which cleaning method is compatible with the material path. The product image does not establish either feature.
What affects the two-component silicone dispensing machine price?
Tank capacity, metering and mixing arrangement, material requirements, utilities and included accessories determine the quoted scope. Send your application and destination country for an itemized proposal covering equipment and any requested molds or auxiliary machines.
How do I specify a silicone mold filling machine for casting?
For a silicone casting machine application, send the mold volume, inlet and vent design, silicone working time and curing method. Confirm the metering and mixing arrangement and check filling on a sample mold. Vacuum equipment, if required, should be identified separately in the proposal.
Silicone Dispensing Machine Manufacturer in China
Chencheng Machinery supplies liquid silicone processing equipment from Dongguan, China. Request a silicone dispensing machine quotation with the equipment configuration, included accessories and delivery scope listed separately.
Send the silicone datasheet, sample or drawing, largest mold fill, target parts per shift, available power supply and destination country. We can review the two-tank silicone dispensing equipment alongside your molds and auxiliary process requirements.